NCI Article Library

High-Performance HVAC Resources

Current Category: Carbon Monoxide

CO Monitor Interference

Over the years there have been many reports of CO Alarms and Monitors going off or showing low CO levels on their digital read outs and yet no detectable CO problems were uncovered. The problem here is that Monitors, Alarms, even Analyzers, using electrochemical...

CO and Combustion Diagnostics: Cause Versus Symptom

by Jim Davis

Jim Davis, Senior Instructor, National Comfort Institute When using the NCI Combustion Diagnostic Reports and Diagnostic Matrix, it is important to recognize the most likely defect/cause of the problem, versus a symptom that it creates. Specifically, a defect/cause is...

“Air Free” CO or “As Measured” Carbon Monoxide?

by National Comfort Institute, Inc.

Jim Davis, Senior Instructor, National Comfort Institute "Air Free" CO or "As Measured" Carbon Monoxide? by Jim Davis The subject of carbon monoxide (CO) Air Free and As Measured is not new, but still causes confusion due to many conflicting protocols. ANSI standard...

CO & Combustion Repair Procedures

by Jim Davis

Many NCI members have requested that we include repair procedures in our member downloads. October's theme is CO and Combustion testing, so we have included some one-page repair procedures that you'll find helpful this fall while addressing heating system performance....

Check Ambient CO

by National Comfort Institute, Inc.

Check Ambient CO While most IAQ problems can irritate you and your customer, Carbon Monoxide can kill. For your safety and to generate CO monitor sales, carry a low-level CO monitor with a digital readout to check CO levels on every service and sales call. Place a CO...

Carbon Monoxide- When It’s Hot, It’s Hot

by Jim Davis

Two questions that come up quite often in our seminars is "why take CO or Combustion readings in summer?," and "why take diagnostic training in the spring?" The thinking is "the heating season is over and by the time we use the information from class next fall, it...

Carbon Monoxide Test Numbers: What Do They Mean?

by Jim Davis

As you test for Carbon Monoxide and measure combustion efficiency, you'll begin to gather test numbers. Let's take a look at some of the standards, and what test results mean under different testing conditions. CARBON MONOXIDE IN AN OCCUPIED SPACE Reactions to various...

Carbon Monoxide Goes to the Amusement Park

by Jim Davis

If you've been through an NCI CO seminar, you've been taught that when performing carbon monoxide analysis on equipment, CO should be stable and that rising CO is the most dangerous of all CO patterns. On the other hand there are isolated cases where CO is not stable...

Brice’s Refrigeration, Inc.

by National Comfort Institute, Inc.

Congratulation's to December's NCI Contractor of the Month: Brice Johnson, President of Brice's Refrigeration, Torrington, Wyoming. Brice Johnson roams the high prairies of Wyoming searching for CO problems as he drives 4 hours from one corner of his service area to...

Brian Garno, Garno Brothers, Swartz Creek, MI

by National Comfort Institute, Inc.

Brian Garno, of Garno Brothers serving Genesee County on the Lower Michigan Peninsula has been selected as this months NCI contractor of the month. Brian also owns and operated Balance Pro, a professional air balancing company serving South Eastern Michigan. You may...